Genie Scienitific - Fume Hoods

FUME HOODS

Slimline Powerhouse Custom Hoods Fume Hood with Built-in Blower Base cabinets Options

A fume hood is defined as a ventilated enclosure that, when connected to a properly designed laboratory ventilation system, will carry the undesirable effluents (generated within the enclosure during a laboratory procedure) away from the laboratory personnel and out of the building (SEFA 1-2002 Laboratory Fume Hood Defined).

Genie Scientific has been in the business of fume hood manufacturing for two decades and prides itself on making safety within the laboratory its number one concern. Genie fume hoods pass the ASHRAE 110-1995 test and are UL listed. Genie fume hoods come standard with a chain driven safety glass sash which has been shown to provide greater strength and durability than the obsolete steel cable still found in many other hoods.

Genie offers several types of fume hoods to meet any laboratories requirements.

GENIE Powerhouse This hood provides more electrical outlets to accomodate use of equipment in the lab.

GENIE Slimline Our standard model, precision crafted and economically priced. Provides a larger work area within the hood without using a lot of lab space.

GENIE Walk In Hoods You create the specifications, we create the hood to meet your needs.

GENIE Fume Hood with Built-in Blower This fume hood is designed with an enclosed exhaust fan.

Slimline Model

Genie Scientific, Inc. offers the "SlimLine" bypass fume hood. This type of hood is made unique in that it allows air to enter into the hood while the sash is fully closed via a bypass system utilizing the front panel at the top and the airfoil at the bottom. By providing an additional path for air to enter, this limits the maximum velocity thus decreasing the risk of turbulence within the hood which would interfere with experiments. The SlimLine was designed for laboratories that require a larger work surface within the hood environment without taking up more space and the narrow design of the hood allows easier installation by enabling it to fit through the width of a standard doorway opening.

The SlimLine is designed with 4" side walls, the superstructure is of heavy gauge steel with powder coated steel upper panel and airfoil. The laminated safety glass sash is chain driven for a smooth efficient movement. The SlimLine can be used with a remote exhaust fan or is available with a built-in fan(3' and 4' models).

FEATURES INCLUDE:

Junction box atop hood
Round stainless steel exhaust duct collar
Chain driven laminated safety glass sash
Phenolic resin chemical resistant hood liner
Powder coated steel front panel

Powder coated steel airfoil
Exhaust fan and light switches
Fixed baffles
Two duplex 115v outlet
Two tube fluorescent light fixture
Easily removable interior access panel
Optional remote service fixtures

Click here for Spec. Sheet
back to top

Powerhouse Model

Genie Scientific, Inc. offers the "Powerhouse" bypass fume hood. This type of hood is made unique in that it allows air to enter into the hood while the sash is fully closed via a bypass system utilizing the front panel at the top and the airfoil at the bottom. By providing an additional path for air to enter, this limits the maximum velocity thus decreasing the risk of turbulence within the hood which would interfere with experiments.

The Powerhouse is designed with 6" side walls to allow for ample electrical capabilities. The superstructure is of heavy gauge painted steel with stainless steel upper panel and stainless steel airfoil. The laminated safety glass sash is chain driven for a smooth efficient movement. The Powerhouse requires a remote exhaust fan. Genie offers a wide selection of fume hoods in a variety of types and sizes to accommodate all your requirements

Hood roof mounted junction box
Round stainless steel exhaust duct collar
Chain driven laminated safety glass sash
Phenolic resin chemical resistant hood liner
Powder coated steel airfoil
Exhaust fan and light switches
Fixed baffles
Two fourplex 115v outlets
Two tube fluorescent light fixture
Easily removable interior access panel
Optional remote service fixtures
Optional velocity alarm

Genie Scientific Inc. manufactures custom hoods to meet any laboratory requirements. Height, width, depth, sash configurations and accessories can be designed to meet your specifications. Dealing directly with the manufacturer cuts out the middleman so that your customized order is shipped on time and within budget.

Let Genie help you design the perfect hood for your laboratory.

Fume Hood with Built-in Blower

FEATURES:

* Powder Coated steel exterior

* 1/4"thick white interior chemical resistant liner

* light switch

* blower switch

* two electrical duplexes

* built-in blower with 1725rpm motor

This bypass hood is of a heavy gauge powder coated steel construction. The laminated safety glass sash is chain driven for smooth efficient movement. This hood is designed with an enclosed exhaust fan.

CHAIN DRIVEN - NEVER CABLE Click here for Spec. Sheet
back to top

Base Cabinets

DESCRIPTION: 18 gauge steel superstructure, self-closing/self-latching doors, flammable labeling.	DESCRIPTION: 18 gauge steel superstructure, two door with aluminum pulls.
DESCRIPTION: 18 gauge steel superstructure, two door with aluminum pulls, lined with white chemical resistant phenolic resin material, labeled with corrosive or acid sticker.	DESCRIPTION: 18 gauge steel superstructure, two door with aluminum pulls, foam lined to absorb noise, floorless for rolling vacuum cart on casters.